Equipment

DYNAMIC SAMPLING:

Geo Environmental Engineering specialises in dynamic sampling with windowless and window sampling rigs, with dynamic probe and diamond coring capabilities detailed below:

  • Windowless sampling (soil samples are recovered in plastic liners) up to 10 metres depth can be achieved using a tracked Dart/Competitor style rig.

  • Dynamic probing up to 20 metres deep to BS1377:1990.

  • SPT’s (Soil penetration testing using open drive shoe) & SPT(C) (Solid Cone) for sand/gravel strata.

  • Hand Held sampling for low head room or confined areas where access for the tracked rig is not possible using a hydraulic hammer to drive the samples into the strata.

  • Concrete coring off the rig for drilling on hard standing.

  • Stand alone diamond coring unit (electric powered) for hole up to 350mm diameters & to a depth of 1.5metres.

  • Hand dug trial pits to expose footings, utilities etc.

  • Water/gas well installations for long term monitoring.

  • SVS Surveys (soil vapour surveys) to determine gas presence before drilling on Petroleum service stations etc.

  • NVQ Level 2 Drillers experienced in logging to BS5930 and Eurocode 7.

CABLE PERCUSSION DRILLING:

Geo Environmental Engineering can undertake cable percussion drilling detailed below:

  • 150mm and 200mm diameter boring to depths of c.50m below current ground levels.

  • Insitu testing to include SPT’s and CPT’s.

  • Insitu sampling to include geotechnical (U100) and contamination (Amber Glass Jars) related sample recovery.

  • Insitu Water Sampling possible (where encountered).

  • Rising and falling head tests.

  • Water/gas well installations for long term monitoring.

  • NVQ Level 2 Drillers experienced in logging to BS5930 and Eurocode 7.